 |
| » |
|
|
| |
|
| » |
|
| » |
|
| » |
|
| » |
|
|
| |
|
| » |
|
| » |
|
| » |
|
|
| |
|
| » |
|
|
| |
|
| » |
|
|
| |
|
|
» |
|
| » |
|
|
| |
|
| » |
|
|
| | |
| | |
| |
|
|
 |
|
|
|
|
|
|
|
|
ProCurve Gigabit 1000Base-T Mini-GBIC (J8177B)
Pluggable Gigabit transceiver (RJ-45) for up to 100m over Cat 5 cable or better. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Ports
1 1000Base-T ports (IEEE 802.3ab Type 1000Base-T)
Connector: RJ-45
Duplex: full
Physical characteristics
Dimensions: 2.56 x 0.55 x 0.57 in. (6.5 x 1.4 x 1.46 cm)
Weight: 0.05 lb. (0.02 kg )
Cabling
Type:
- 1000Base-T: Category 5 (5E or better recommended), 100 Ω differential 4-pair unshielded twisted pair (UTP) or shielded twisted pair (STP) balanced, complying with IEEE 802.3ab 1000Base-T
Maximum distance: 100m
Notes
When used in the ProCurve Switch gl 10/100/1000 Module (J4908A), the J8177B Mini-GBIC can be installed in either the upper or lower Mini-GBIC port, but will block access to the other port.
Requires specific code version for support.
- For use with 9300m series modules, requires code 07.08.00a or greater
- For use with 8100fl series modules, requires CY.01.02.0050 or greater
- For use with 5300xl series modules, requires code E.09.11 or greater (excluding E.09.21)
- For use with 4100gl series modules, requires code G.07.69 or greater
Not supported on dual personality ports.
|
|
|
|
|
|
|
